It’s January 28th and I should be working on my paper submissions. So should you! But why write when we can meta-write? ICML deadlines loom only twelve days away. And KDD follows shortly after. The schedule hardly lets up there, with ACL, COLT, ECML, UAI, and NIPS all approaching before the summer break. Thousands of papers will be submitted to each.
The tremendous surge of interest in machine learning along with ML’s democratization due to open source software, YouTube coursework, and the availability of preprint articles are all exciting happenings. But every rose has a thorn. Of the thousands of papers that hit the arXiv in the coming month, many will be unreadable. Poor writing will damn some to rejection while others will fail to reach their potential impact. Even among accepted and influential papers, careless writing will sow confusion and damn some papers to later criticism for sloppy scholarship (you better hope Ali Rahimi and Ben Recht don’t win another test of time award!).
But wait, there’s hope! Your technical writing doesn’t have to stink. Over the course of my academic career, I’ve formed strong opinions about how to write a paper (as with all opinions, you may disagree). While one-liners can be trite, I learned early in my PhD from Charles Elkan that many important heuristics for scientific paper writing can be summed up in snappy maxims. These days, as I work with younger students, teaching them how to write clear scientific prose, I find myself repeating these one-liners, and occasionally inventing new ones.
The following list consists of easy-to-memorize dictates, each with a short explanation. Some address language, some address positioning, and others address aesthetics. Most are just heuristics so take each with a grain of salt, especially when they come into conflict. But if you’re going to violate one of them, have a good reason. This can be a living document, if you have some gems, please leave a comment.
Keep Your ABstract SHort
You can’t get it all out in the abstract. Don’t even try. Think of the abstract as the 2-minute spotlight talk advertising your paper. The points should feel like bullets. Here’s one (among many) tried-and-true formula:
- Contextualize the problem in either one sentence or one phrase
- Identify what’s wrong with existing approaches
- Go big: clearly state your major contribution (can also lead with this).
- Two or three sentences to sell the details, major quantitative result, etc.
Here’s the first brilliant abstract I ever read in a machine learning paper
“Mixtures of Gaussians are among the most fundamental and widely used statistical models. Current techniques for learning such mixtures from data are local search heuristics with weak performance guarantees. We present the first provably correct algorithm for learning a mixture of Gaussians. The algorithm is very simple and returns the true centers of the Gaussians to within the precision specified by the user, with high probability. It runs in time only linear in the dimension of the data and polynomial in the number of Gaussians.”
– Sanjoy Dasgupta in “Learning Mixtures of Gaussians”
Note that Sanjoy might have made it even more compact by combining the first two sentences: “Current techniques for learning mixtures of Gaussians from data are local search heuristics with weak performance guarantees.”
Pro: Even terser. Con: leading with the key phrase “Mixtures of Gaussians” catches the eye in a way this version does not.
Don’t Tease the Reader
Follow-up to above: If you have a great quantitative result, stick the number right in the abstract and the introduction. If your paper yields a single equation that can be operationalized, stick it right in the introduction. People should read on because they are interested, not because you are teasing them by withholding information.
Delete generic openings
“The last 10 years have witnessed tremendous growth in data and computers.” “Deep learning has had many successes at many things”. If the first sentence for your paper can be pre-pended to any paper in all of ML/big data, delete it. First impressions matter. The first sentence is the most precious real estate in your introduction. Don’t squander it.
Q Before A
It’s difficult to get excited about a solution if you don’t believe there is a problem. If your paper is completely abstract and has no bearing on the real world, then it should be evaluated as a work of pure mathematics. It probably won’t fare well in that theater. If possible: lead with a compelling real-world example, formalize it as an abstract problem, and then close the loop with experiments that address the motivating case.
Focus on what your method does, not what it doesn’t do
Sometimes you need to set up a contrast. But don’t get bogged down in describing ideas in the negative, especially your own. When all else is equal (semantically), it’s much more readable to ditch the indirection and just say precisely what something is, not what it isn’t. This is especially true for your own methods.
Word are not Sentences. Sentences are not Paragraphs. PAragraphs are not subsections. Sections contain More than one (or Zero) SubSections. Papers Contain More than One Section.
One immediate tell that you are engaging with a lousy writer is that the paper doesn’t look right, before you read a single word. Sections, like bullets on slides should be balanced. If you just list the Section titles, they should make sense as belonging to the same scope. Same concept applies all the way down. Occasionally, a paragraph can have 2 sentences. But the safe heuristic is paragraphs have 3 sentences minimum.
A Reader should understand your paper just from looking at the figures, or without looking at the figures
A blind reader should understand precisely what you do, even if they miss a couple granular bits of data captured in figures. Any critical observation or technical details must appear in the paper’s main text, which can reference figures for visual corroboration.
Similarly, the figures should tell a coherent story. If your reader skips to the figures (reviewers will), they should be able to see roughly what’s going on and understand the significance of the findings. If it’s not obvious whether higher or lower scores on y axis are better, the caption ought to say this.
But don’t go overboard. Captions should not be giant paragraphs. A good caption should be between 1 and 3 lines. Note: the computer vision community understandably has a very different relationship with figures. Sometime a single figure will take over an entire page and 100s of words of detail absent from the rest of the draft. I do not like this style, but if you’re submitting to a conference with such norms, perhaps make your own decision.
Quickly arrive at the paper’s contribution
As a young PhD student, and an outsider to the ML community, I was frustrated that papers were not self-contained. As a result I tried to make each paper fully understandable to an outsider. This won me some readers in the general public but (likely) cost me several early conference rejections.
Longwinded front-matter in conference papers (less applicable to journal) is bad for the following reasons: (1) Reviewers read 5-10 papers per conference and 50-100 papers per year in very similar areas. The basics will bore them. (2) If your contribution starts on page 5/8, you have very little excuse for having failed to do anything the reviewer asks for.
There are two issues at stake here: knowing your audience and positioning intelligently. Most of your abstract (by sentences), your intro (by paragraphs), and your paper (by pages) should articulate what you do.
Anticipate the reader’s questions and answer them in the paper
A good reviewer will try to come up with critical questions to challenge the proposed work. Is it possible that this method only works because X? If the answer is “I don’t know” and “no” would be damning, your paper might rightly be rejected. If you can anticipate the question and know the answer, write it. If you do not know the answer, then run an experiment to find out. I hope this point hits home that doing strong research and writing clearly are tightly linked.
The Scientific “We”
In scientific writing, narrate with the pronoun “we”. This style serves a didactic purpose: “we” refers to “you” (the reader) and “I/we” (the authors) together. Sometimes, you may need to express an opinion. These cases should be made clear from context.
Avoid hostages to fortune
Any qualified reader, who goes through your entire draft, even if they do not share your opinions, preference for methods, or values in life, should be unable to disagree with any sentence in isolation. “Our method X outperforms Y on most datasets.” Does it? Most out of what collection of datasets? Could your reviewer choose some dataset repository and find the statement false? Better to say “many” datasets. This is both better defined and much harder to disagree with.
A Sin of Omission is Better than a sin of Commission
Related to the above: if you are not 100% sure about a claim, do not make it. It’s hard to imagine the reviewers rejecting a paper because you omitted a one-line boast. It’s easy to imagine one line inspiring a rejection.
When you must express an opinion, identify it as such
You might ask, the reviewer can disagree with my opinions, does that mean I cannot ever include an opinion in a paper? You can include an opinion, e.g., the great promise of GANs for anomaly detection, but the factual assertion should be that it is your opinion: “in our opinion, GANs…”.
Break up long sentences
Young writers often believe, mistakenly, that long sentences reflect language skills. Great scientific writers write mostly in short sentences. If you find yourself struggling to pack an idea in one sentence, it probably requires more than one. Technical writing should be as clear as possible. If simplicity is possible, then make the writing simple. The contribution of your paper should be sophisticated ideas, not sophisticated sentence structure.
JetTison intensifiers and Vacuous Adverbs
Examples: Extremely, Very, Incredibly, Completely, Barely, Essentially, Rather, Quite, Definitely, …
Intensifiers are bad for two reasons: (i) they undermine their own purpose: “algorithm X provides a tight approximation” sounds confident, while “algorithm X provides a very tight approximation” drips with insecurity, and (ii) they express opinions. Is the algorithm better? Yes. Is it much better? That’s an opinion, thus a hostage to fortune (see above).
Subjects, verbs and modifiers, should all agree
One common mistake in writing is to attribute verbs and modifiers to the wrong subjects, e.g. the algorithm tries to X, or the data is biased. Algorithms don’t try, just as they don’t think. If we are speaking to desires or to intentions, then they belong to “we”, the modelers, not the algorithm. This sounds like common sense but errors of disagreement plague academic writing across all disciplines. In some fields, such as interpretability and fairness (in ML), where the right definitions are not clear, sloppy writing like this can hold back the entire field.
Corollary: every action should be attributed. Verbs with no subject can often emerge in passive constructions (where the main verb is “to be”). For example, “LSTMs are claimed to X, Y, Z”. Who is doing the claiming? This information better appear somewhere. One solution would be to append a parenthetical citation. A better solution might be clearly put the claims in the mouths of their authors.
The papers you ought to cite are likely written by the people who will be reviewing your paper. One common lame review will consist of an anonymous reviewer asking why you didn’t cite works A, B, and C (all by the same author). If the works are not relevant, then do not cite. If they are relevant, you have nothing to lose and much to gain by citing.
Among the good karma you’ll earn: (1) you are less likely to get a shirty review, and (2) these are often people you want to work with later and they may notice the citation and read your paper.
Reviewers are lazy, and do not have photographic memories. If your work builds on others’ contributions, do not confine your citations to the related work section – that’s just to summarize your work’s context in the literature. Cite throughout the text whenever you invoke methods that precede your own. This is especially true for recent work (last 5-10 years), which may not yet be common knowledge and thus confined to citation-dense paragraph in the related work section.
Exhaust the References Limit
This is a pragmatic positioning point and applies to conference publications that limit the number of pages for references (often 1 or 2). If you omit the most related work, reviewers will nail you no matter what. But if you omit some borderline related work and they call you on it, having no room left in the references section is a good excuse. If you are squatting on a blank bibliography page, don’t expect sympathy from reviewers.